Why are my slide outs not going in or out?

If you hear a weird noise when you try to extend the slides, it could be the pump trying to work. If you just can’t seem to make those slide outs go in or out, it is possible on most RVs to manually extend or retract the slides.

Can a slide out Hang Up All at once?

I wait 10 seconds or so push the button then it My slide out will not slide out all at once. It starts out… Vocational, Technical or Tra… Vocational, Technical or Tra… 2017 Winnebago vista. Slide out hang up on one side when 2017 Winnebago vista. Slide out hang up on one side when going out or in.

Why is my Newmar slide out not working?

Check – Insure the slide out wall locking arms are in the released position. This was quite a task as one was visible (the forward lock) and I could see that it was retracted and not holding the room in. But the aft or (rearward lock) was not visible because it was hidden by our refrigerator wall.

What kind of switch do I need for slide out?

Magnetic switches are very commonly used for the sensor circuits stop point. (They do not fail often) The setup should have 2 high current relays – one for the extend and one for the retract function. Is the bathroom wall between the slide in question? or some other space/wall at one end of the slide.

Can a slide out slide out all at once?

My slide out will not slide out all at once. It starts out then stops. I wait 10 seconds or so push the button then it My slide out will not slide out all at once.

Are there any problems with the slide out on an RV?

Troubleshooting RV Slide Out Problems: One main problem with slide outs is that they may get out of alignment. The good news here is that each slide can be adjusted separately. All you have to do to fix it is take your RV to a dealer and let them make an adjustment.

What to do if your slide out gets stuck?

If your slide out gets stuck and has problems extending or retracting, there are some straightforward ways to determine the problem. First make sure the slide out isn’t locked in position, then determine if there is a power supply problem.

Which is easier to repair electric slide outs or hydraulic slides?

Electric slide outs are usually easier to repair than hydraulic systems. Hydraulic systems use a pump to trigger a hydraulic ram. These pumps can malfunction if the fluid level is low, which may be due to a leak. Damaged valves are another common cause for pump failure. Hydraulic systems are typically found with larger slides.

Where does the power come from to power the slide in?

One to power the slide in and one to power the slide out. input to the common point of the repay pictured is pictured; but that power should come from a larger fused supply with the key switch only controlling the relay coils of the in and out relays / with a limit switch to stop the slideout travel and to stop the slide at a in or park point.

Why does my slide not retract after new motor?

After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.

Where are the rods that drive the slide out?

The opening is just to the left and below the yellow wire screw caps (first photo with old motor) Square rods that drive the slide bars are attached on both sides of the motor gear box (second photo with new motor). The slide-out that was stuck open is also shown below.

Are there any problems with the slide out?

Most slide out problems are not that difficult to trace and then solve. There will be those that require the help of a professional technician to repair. The key would be to get to know your system and learn when the task is beyond your abilities to handle .

Can a slide out on an RV fail?

But electrical RV slide-out systems can, and do, fail. The time to learn to troubleshoot a slide-out problem is not in a campground with a fully extended slide-out. Take the time to learn how to manually open the electric slide-out on your travel trailer. Park the trailer in an area clear of obstructions.

Why is my slide out motor not working?

RV Slide Motor not Working. The bad news is that one of your slide out motors may have died. The good news is that the failure is due to a faulty wire or connection which caused a short and tripped a breaker. The latter may not be the case if you have 2 motors on your slide out and one is still working.

How to manually open an electric slide on a travel trailer?

Make sure the trailer is level before operating the slide-out. Check the battery and verify it is fully charged and connected to the electrical system. Press and hold the wall-mounted In/Out switch. If the slide does not extend or retract, use the manual override to extend or retract the slide-out. Find the slide-out motor.

What causes an RV slide out to go out?

RV camping can easily drain your batteries, and eventually batteries get old and just need to be replaced. I said that we’d start out simple and easy, and I wasn’t kidding. A poorly performing battery at the end of its lifespan can be the cause of a failure to retract the compartment.

Why is my Lippert Slide Room not working?

While the hydraulic mechanisms of a Lippert system make the slide process much easier, there might be times when your slideroom doesn’t want to cooperate. More often than not, the cause is a jammed gear or drained battery, but motors occasionally become defective, leaving your room either permanently extended or retracted.

Do you need a battery for a slide out compartment?

Whether hydraulic or electric, your slide out compartment will require power from the RV battery. If pressing the switch doesn’t trigger any sound or movement, the electrical system will be the right place to start testing. 1. Battery

What causes a slide out on an RV?

For most of us, that means you’ll need a professional RV slide out repair. A hydraulic failure can also cause slide out issues. Common hydraulic issues include a busted hydraulic valve or a hydraulic leak. Like the mechanical issues mentioned, hydraulic slide out repairs are generally best left to a professional.

What’s the best way to fix a slide out?

Use a wire brush to remove any debris, dirt, paint chippings or rust from your slide-out tracks. Clean out all the dirt and road debris from the tracks. Apply lubricant on the gears, tracks, and rails of your slide-outs. Try and retract and fully extend your slide-out a number of times. At this point, the squeaking sounds should have disappeared.

Where is the slide out controller on a motorhome?

For my motorhome, there are two slide out controllers attached to the “roof” of the middle basement compartment between the two main beams of the frame. One controller for the passenger side slide-out and one for the drive side slide-out. RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller.

When to troubleshoot an RV slide out mechanism?

If you notice your RV slide room is experiencing some sort of malfunction, you may need to troubleshoot to diagnose the problem and figure out the best course of action. In order to pinpoint the proper solution, you have to first determine the type of RV slide out mechanism that’s equipped on your rig.

Can a single pump be used to retract slide outs?

In either instance you will probably find yourself at the mercy of an RV repairman, who may or may not have the parts needed for a quick repair on hand. Also, due to the inherent power of hydraulics, a single pump/motor is often used to extend/retract all slide-outs. When it works, you’re golden.

Can a bulldozer slide out of the dirt?

If you’ve ever marveled at the ability of a bulldozer to easily pick up thousands of pounds of dirt, you’ve witnessed hydraulics at work. This massively robust approach makes light work of slide-out movement, which (theoretically, at least) leads to long life and relatively few problems.

Why are the slides on my Winnebago journey not working?

2004 Winnebago Journey two slides. Neither slide will move all of sudden. Not sure how to trouble shoot this ? If you have multiple slides not running it is best to start with the batteries. They could be low or weak. Slides take a lot of power and if you have weak batteries they won’t run at all.

Why is my passenger side slide not retracting?

My trip to Baton Rouge for LSU football this past weekend went to heck when my passenger side slide would not retract (we stayed Thursday night in Lake Charles, LA to visit my son’s family). After calling a couple of Lake Charles RV repair shops, the initial thought was the slide motor had quit working.

Why is my RV slide not going all the way out?

RV Slide will Not Go all the Way Out Most RV problems can be solved by looking for simple obstacles or obstructions first. If this problem is happening to your kitchen slide out then you may have some plumbing lines or other kitchen equipment in the way.

What happens when you push the slide out button on an RV?

If your RV or motorhome doesn’t have the juice, your slide outs aren’t going to budge! If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed.

Is the Lippert slide out controller a problem?

A final update for my slide-out problem. The good folks at RV Masters in Houston diagnosed the problem to be a “bad” Lippert Slide-Out Controller. The “in/out” switch and relay all work fine and were not the problem. A new controller was installed and the slide out is working great again!

Where can I buy a slide out RV controller?

RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller. A new Lippert Slide-Out Controller can be purchased from Amazon for $85 (not including shipping) –> .

How does a slide out in an RV work?

In the electrical slide-out, the motor directly does the work of moving the slide out room. In the hydraulic slide-out, the 12-Volt motor powers the hydraulic pump that then provides the pressure to move the slide in or out.

Is there an electrical problem with the slide out?

Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.

What to do when the slide out doesn’t slide?

A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor. You’ll definitely hear the motor laboring if this is the problem, so make sure to keep an ear out for odd sounds too!

How does a hydraulic slide out system work?

What happens to slideout toppers in the wind?

This material still provides shade to help cool down the slideout in bright sun, but because of its screen-like form, the wind doesn’t have as much opportunity to grab at the topper surface, hence, less noise and less chance of tearing. Previous article Reefer madness? Did you purge the gas line?

Why does my Forest River slideout not work?

The slides on some rigs (like Forest River) will not operate with the ignition or engine running. Safety issue. Other rigs are different. A friend in our chapter had this same problem that he fought for several years. His slideout operated with an electric motor driving 2 parallel rack and pinion sets from a single shaft.

When does an RV slide out become a problem?

The final situation where slide outs may become a problem is when you are in a campground, Box store parking lot or RV park and there is not enough space. You can’t use your slide out because you will be encroaching on others, some of whom may have slide outs of their own and employ them because they were there first.

Are there any slide outs that are reliable?

For the most part, the answer to that question is, yes they are reliable. When in top condition, they work as designed and provide you with that extra space you want when in closed quarters. The only time their reliability comes into question is when there is something wrong. But slide outs are not perfect and they are made by imperfect people.

Why does my iFixit slide out motor not work?

– Recreational Vehicle – iFixit Slide-out motor will not work. My 12 foot living room slide stopped working. It apparently has 2 motors which are synchronized to work each end of the slide when I press the extend or retract button. One of the two motors stopped working. My Thor motorhome manual does not show a fuse for the motors in the fuse panel.

What to do if your slide out slides are crooked?

To solve this issue, you can remove some of the carpet and replace it with slide out slickers. Or you can shim your slide out slides with thing, 1/4” thick, aluminum flat stock. With the latter method you can interchange the metal and thickness to fit your situation.

What causes a slide out to not retract?

With that being said, the biggest issue with slide-outs doesn’t have anything to do with the extension/retraction process. It has to do with seals, the rubber gaskets that surround a slide-out and keep the elements at bay. Improperly installed seals can pull loose and affect movement of the slide.

What to do when your slide out won’t slide out?

At this point, a working electric motor will serve no purpose and you will soon be getting your cardio workout for the day as you attempt to muscle your slide-out back in manually –against its will. Most systems today have an emergency manual override where you use a hand crank (or electrical drill) to extend/retract the slide-out.

Why is my slide out not working in my RV?

Slides take a lot of power and if you have weak batteries they won’t run at all. You can get them tested at local auto parts stores for free usually. If the batteries are good you then want to check the fuses and the wiring. A bad wire connection will prevent them from moving as well.

Where to look for a slide out mechanism?

Go to the rear of the arms to look and inspect the motors. These are for electric systems, if yours is hydraulic then you will have to inspect the pump, controls and the valves to the rooms. There could be a fuse for the pump that will need checked.

Are there any problems with the Lippert slide out?

Further information and manuals for various Lippert Components systems and parts are available, including those for In-Wall, Flush Floor, and Above Floor slide outs. As previously stated, leaks are a common problem with RV slide outs.

What to do if your slide out is not syncing?

There is no adjustment of a cable to play with. You don’t have to remove the gears and put them a couple of further notches down the track. If you’re striking the same issue with syncing the motors here’s how to fix it. Fully extend the slide-out.

Why are my slide outs not going in or out?